Mercedes 24/100/140 hp, 1924-1926
Mercedes-Benz 24/100/140 hp, 1926-1928
Mercedes-Benz 24/100/140 hp Model 630, 1928-1930
- A belt-driven supercharger gave output a significant boost
- Numerous body variants were available ex factory
Paul Daimler left DMG in 1922 in disagreement with the Supervisory Board. It had called for easier-to-sell models in the lower price ranges, whilst Daimler wanted a new model with eight cylinders. His successor was Ferdinand Porsche, who had come from Austro Daimler. He had already taken over from Daimler once before, at Austro Daimler’s forerunner, the company Austrian Daimler-Motoren-Gesellschaft mbH in the town of Wiener Neustadt.
What was not known at the time was that Porsche’s main development focus was also more on large and expensive cars rather than small and lower-priced models. So in hindsight it is not surprising that the first project Porsche undertook was to design a representative twin model series of new luxury vehicles with displacements of 4 litres and 6.2 litres. The only differences between the two were to be found in the swept volume of the engines, in the wheelbase, the overall length and a few points of detail in the body. The length available for the body on the chassis and the technically sophisticated basis were identical. The larger engine required a wheelbase that was 120 millimetres longer and resulted in the chassis weighing 100 kilograms more.
Porsche followed his previous convictions at DMG, too, believing that a good and powerful engine also had to be aesthetically pleasing. For the new six-cylinder engines he adopted the basic concept that he had also used for his engine designed at Austro Daimler, from that company’s Model AD 617. The common features were the light silumin-cast crankcase with drawn-in dry cast cylinder liners, the crankshaft with only four bearings and the removable cylinder head with an overhead camshaft, which used rocker arms to operate the valves positioned in line via valve levers. The camshaft was driven by a vertical shaft driven from the clutch side. Together with the manual transmission the engine formed a cohesive component and thus at the same time a huge functional block. It comprised all the levers required to operate the car, including the steering gear and the steering column with the steering wheel. Fitted to the transmission were the starter, the air pump for inflating the tyres in case of damage to them, the hand levers for the gearshift and handbrake plus the pedals for the clutch and brake.
For his new designs at DMG, which arrived on the market in 1924, Porsche adopted the principle of supercharging which had been introduced by Paul Daimler. The positive-displacement belt-driven supercharger, with a high-ratio design of around 1 : 3, was located at the front end of the engine in a light-alloy housing fitted with cooling ribs. It was switched on by pressing down the accelerator, similarly to the kickdown position familiar from today’s automatic transmissions, via a multiple-disc clutch. When the accelerator was released it was slowed down by a multiple-disc brake located on the crankshaft. For the two large touring cars Porsche used the principle of the pressure carburettor engine – situated between the belt-driven supercharger and the combustion chamber – which had long been championed at Daimler-Benz.
An early form of the multifunction steering wheel
The characteristic features which stood out at that time compared with the passenger cars produced up until then were the removable cylinder head, the dry multiple-disc clutch in place of the double-cone clutch with a leather gaiter used thus far, the slightly pointed nickel-plated honeycomb radiator instead of the previous more deeply contoured and painted pointed radiator, the introduction of an actuating ring on the steering wheel for operating the horn by pressing the upper part of the ring and the dimming device by pressing the lower part of the ring, and the internal expanding brake for all four wheels.
In Porsche’s two-passenger car with a 4-litre and 6.2-litre engine, the Model 24/100/140 hp with the larger unit was the driving force – not in terms of the number of vehicles built – the smaller and less-expensive car retained the upper hand there. But when it came to the image factor – esteem, as people would say in those days – the car with the brawny engine was clearly the more representative vehicle.
Over the years changes were made to the model designation. To start with it was called the Mercedes 24/100/140 hp, and then after the merger in June 1926 Mercedes-Benz 24/100/140 hp. In 1928 it became the Model 630, as the previous rather cumbersome name was not much of a purchasing incentive, and also the aim was to introduce uniformity with the Stuttgart, Mannheim and Nürburg vehicle names, which were also given a model number which corresponded to the displacement.
The larger engine had a displacement of precisely 6240 cubic centimetres, which, strictly speaking did not justify the figure ‘630’ in the model designation which was supposed to refer to the displacement. For nearly 100 years, history served up a parallel episode: the V8 engine installed by AMG today is also called a 6.3-litre engine, although it has a displacement of 6208 cubic centimetres.
In October 1928, the Model 630 was upgraded, whereby the more powerful engine with 160 hp (118 kW) from the K model was also supplied as an option for the normal touring car. In the plant’s documentation this variant was described as the ‘Model 630 with a K engine’ or ‘6-litre car with a K engine.’ This combination assumed the flagship position in Daimler-Benz AG’s passenger car range up until the ‘Super Mercedes’ appeared on the scene in October 1930. It developed into the somewhat more durable variant, and – eventually – also the more sought-after one. Production of the chassis and car with the 140 hp (103 kW) engine ceased in 1929, that with the 160 hp (118 kW) K engine a year later. Naturally this did not exclude so-called stock vehicles from only being sold and registered much later.
As the years went by some changes were made so as to keep the vehicles up to date. These included those carried out in 1926 to replace the rear cantilever springs by semi-elliptic springs, which were fitted beneath the rear axle from the outset.
From autumn 1927 the three metal tubes were added as trim for the exhaust pipes which ran on the outside of the bonnet at that time, and from October 1928 customers could choose to have the aforementioned engine from the Model K installed – just in the open touring car at first but then later in all the other body variants too. This was followed in 1928/29 by the inclusion of a Bosch-Dewandre brake booster.
As development continued there were only minimal changes to the range of bodies on offer. Particularly impressive features by current standards include the two open-top touring cars with five or seven seats, which were also available with an attachable saloon body in the style of a present-day hardtop. Between 1926 and 1928 the spectrum of bodies available and the pricing was as follows:
The bodies were manufactured either at the Sindelfingen plant or, as was the norm back then, especially where premium-segment cars were concerned, purchased from internationally renowned body assemblers in accordance with customer requirements. In this case special requests were then met, such as the extra-high Pullman saloon for Reich President Paul von Hindenburg, so that on official occasions he was able to wear his spiked helmet and in civilian dress his top hat inside the vehicle. Hindenburg also had a Pullman cabriolet at his disposal. Both cars were specially designed at the Josef Neuss car factory in Berlin.
The following are examples of well-known and renowned companies which supplied bodies for the Mercedes-Benz 24/100/140 hp Model 630:
D’Ieteren Frères, Brussels
Erdmann & Rossi, Berlin
Hibbard & Darrin, Paris
Million Guiet, Paris
Josef Neuss, Berlin-Halensee
Papler & Sohn GmbH, later, Papler GmbH, Cologne
Van den Plas, Brussels
Voll & Ruhrbeck, Berlin-Charlottenburg
VIP customers included:
Reich President Paul von Hindenburg
King Gustav of Sweden
King Alfonso of Spain
Emil Jannings, actor
Richard Strauss, composer
Richard Tauber, singer
Jan Kiepura, singer
Oscar R. Henschel, industrialist
In total, 1080 vehicles of the Mercedes-Benz 24/100/140 hp Model 630 were constructed between 1924 and 1930. In addition to this, there were also 117 vehicles with the powerful K engine.